SLH3148H
SLH3148H
| Specification Parameter | Target value |
|---|---|
| Base material | HDF |
| Delivered moisture content | 4–12% (measured humidity: 6%) |
| Length tolerance | +/– 15 mm |
| D/B dimension tolerance < 15 mm | +/–0.8 mm |
| D/B dimensional tolerance ≥ 15 mm | ±5.4% of the profile width |
| Edge length | max. 10 mm/lm; may require professional modification |
| Bend | h ≤ 10 mm/lm: may require professional modification |
| MDF density at the edges | 600–740 kg/m³, depending on the profile geometry |
| Transverse hardness | ≥ 0.45 N/mm² (according to EN 319) |
| Surface hardness | ≥ 18 N/mm² (per EN 310) |
| Modulus of bending stiffness | ≥ 2,200 N/mm² (according to EN 310) |
| 24-hour swelling value | < 15% (according to EN 317) |
| Paper for binding | Melamine-synthetic facings made of rayon with a coating Brightness: Woolscale 7, blue Gloss: 8–20 unit of measurement at a 60° angle Wear resistance: ≥ 250 unit of measurement per EN 13329 (CS10/500g tiles) Edge adhesive: for manual application along the edges. Must be removed after 24 hours |
| Heat resistance | ≥ 70°C / 1 hour |
| Front Surface | Profile edges and unacceptable damage |
| Storage | Store in an upright or horizontal position; protect from direct sunlight and moisture Ideal conditions: 18°C, 55–70% relative humidity |