| Product: | MDF strip with paper foil |
| Delivery moisture content: | 4-12% (reference moisture content: 6%) |
| Length tolerance | +/- 15mm |
| Dimensional tolerance D/B < 15 mm | +/-0.8mm |
| Dimensional tolerance D/B ≥ 15 mm | +/- 5.4% of the respective profile cross-section |
| Longitudinal curvature | max. 10 mm/running meter |
| Length: | 2400 mm |
| Height: | 70 mm |
| Depth: | 16 mm |
| Torsion: | h ≤ 10 mm/running meter |
| Raw density of MDF | 600 – 740 kg/m³, depending on profile geometry |
| Transverse tensile strength | ≥ 0.45 N/mm² (according to EN 319) |
| Bending stiffness | ≥ 18 N/mm² (according to EN 310) |
| Flexural modulus of elasticity | ≥ 2200 N/mm² (according to EN 310) |
| 24h source value | < 15% (according to EN 317) |
| Paper film | Melamine-urea resin-impregnated thin cellulose decorative paper with a top layer |
| Light resistance | 7 on the blue wool scale |
| Degree of gloss | 8 – 20 units at a measurement angle of 60° |
| Abrasion resistance | ≥ 250 U according to EN13329 with CS10/500g abrasive wheels |
| Heat resistance | ≥ 70°C / 1 hour. |
| Formation masking | Only commercially available masking tape can be used to mask the skirting board during painting work. It must be removed after 24 hours at the latest |
| Planing surface | Visible side: Breaks or damage to the profile are not allowed. |
| Storage | Upright or lying down, Protect from direct sunlight and humidity, Ideal climate: 18°C/55-70% relative humidity |
General information
Article
Technical data
The SLW 070 skirting board can be used in a variety of ways in interiors and provides
the perfect technical and visual finish for a vinyl flooring installation as an edge accent.
The skirting board is available in white
